2GIG
2gig Z-STAT Z-Wave Programmable Smart Thermostats With LED backlit display
2gig Z-STAT Z-Wave Programmable Smart Thermostats With LED backlit display
Regular price
$207.00 USD
Regular price
Sale price
$207.00 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The Z-Wave programmable thermostat brings together everything you need to create an energy-intelligent home: remote control, seven-day programming, and seamless integration with the GC2 panel.
Installation Guide
Replace your old thermostat with the Z-Wave CT100 Thermostat by using the detailed instruction manual included with your product (or scroll down for PDF's).
This thermostat is designed for use with 4AA alkaline batteries and/or 24 VAC C-wire (or a 12-24 AC or DC source) and millivolt gas systems. Each thermostat relay load should be limited to 1.0 amp; higher amperage may cause damage to the thermostat.
To add the thermostat to your Z-Wave network, send a pairing command from your hub, then press and release the MENU button on the thermostat. Press the MATE button. This will bring you to the network screen and a large r1 will be displayed. Press the MATE button again. This will initiate the inclusion process. When the device has joined your network the word LINK will appear under the radio tower. Your controller will indicate the thermostat was successfully added to its network.
Installation Guide
Replace your old thermostat with the Z-Wave CT100 Thermostat by using the detailed instruction manual included with your product (or scroll down for PDF's).
This thermostat is designed for use with 4AA alkaline batteries and/or 24 VAC C-wire (or a 12-24 AC or DC source) and millivolt gas systems. Each thermostat relay load should be limited to 1.0 amp; higher amperage may cause damage to the thermostat.
To add the thermostat to your Z-Wave network, send a pairing command from your hub, then press and release the MENU button on the thermostat. Press the MATE button. This will bring you to the network screen and a large r1 will be displayed. Press the MATE button again. This will initiate the inclusion process. When the device has joined your network the word LINK will appear under the radio tower. Your controller will indicate the thermostat was successfully added to its network.
