Skip to product information
1 of 1

Wade Antenna

Wade Antenna Delhi 20A 20 Foot Pop-Up Galvanized Steel Telescoping Mast

Wade Antenna Delhi 20A 20 Foot Pop-Up Galvanized Steel Telescoping Mast

Wade's Model 20A 20 Foot Pop-Up consists of (1) 1½" 10 foot bottom section and (1) 1¼" 10 foot top section.

Weight:
16 lbs

Installation Instructions:
• Secure base and anchors (sold separately). layout according to your guying setup.
• Attach lowered mast to base.
• Secure guy lines to the lower guy ring and attach to anchors. Align the mast vertically by tightening the guy lines.
• Remove guy ring stop, reposition under upper guy ring and tighten bolt securely at desired location.
• Secure appropriate length guy lines to the upper Guy Ring and let them hang.
• Raise the upper tube until the snap lock clip snaps into the upper tube locking it in place. (You may have to rotate the upper tube to align hole for snap lock clip to engage).
• Tighten the mast clamp.
• Secure appropriate length guy lines to the next highest guy ring, and let them hang.
• Raise the next smallest tube until the snap lock clip locks into place, same method as mentioned in step 6.
• Tighten the mast clamp.
• Repeat steps 8-10 until all sections have been raised and are secured.
• Attach all hanging guy lines to their respective anchor. Align the mast vertically by tightening the guy lines. Be sure to work your way up the mast while tightening the guy lines.
View full details