Lava
Lava RVHD-2000 OmniPro RV and Marine Over the Air HDTV Antenna - 100 Mile Range
Lava RVHD-2000 OmniPro RV and Marine Over the Air HDTV Antenna - 100 Mile Range
Couldn't load pickup availability
The RVHD-2000 has the most advantages when it comes to RV HDTV Antennas. Quality of reception is unmatched in the industry! Especially designed for moving recreational vehicles(RV's, Boats and Caravans).
Specifications:
 Frequency(VHF): 47-230MHz
 Frequency(UHF): 470-862MHz
 Gain: 30dB
 Receiving Range: AM/FM/VHF/UHF
 Impedance: 75?
 Noise figure: 3dB
 Power input: DC 12V
 Max output level: 100dBµV
Operating Instructions
 Stellite Antenna output Connector: use a cable to connect to a TV to receive satellite signal
 TV 1 or Cable Output Connector: use a cable to connect to a TV to recieve either TV antenna or cable reception
 TV Antenna Power Indicator: When lit indicates TV reception,when off cable reception
 TV Reception or Cable Selector Switch: Press this button to chose from TV or cable reception
Installation
 Step 1: Choosing a Location: Make sure the mounting location has a sufficient flat area so the antennaÂs mounting stand can be mounted flat.
 Step 2: Drilling holes: Use the mounting bracket as a template to determine where to drill the holes.
 Step 3: Assembling the Antenna: Rotate the antennaÂs locking nut all the way down on the base. Gently pull the antennaÂs cables thru the mounting stand. Screw the antenna onto the mounting stand then rotate up the locking nut to lock the antenna into place.
 Step 4: Attaching the Antenna: Feed the cables thru the hole on the roof. Put the mounting bolts thru the holes in the mounting stand. On the interior, place the mounting bracket then use the nuts to secure the antenna.
 Step 5: Wiring: Connect the cables from the antenna to distribution wall plate and to the radio. Connect the power cables from the distribution wall plate.
Specifications:
 Frequency(VHF): 47-230MHz
 Frequency(UHF): 470-862MHz
 Gain: 30dB
 Receiving Range: AM/FM/VHF/UHF
 Impedance: 75?
 Noise figure: 3dB
 Power input: DC 12V
 Max output level: 100dBµV
Operating Instructions
 Stellite Antenna output Connector: use a cable to connect to a TV to receive satellite signal
 TV 1 or Cable Output Connector: use a cable to connect to a TV to recieve either TV antenna or cable reception
 TV Antenna Power Indicator: When lit indicates TV reception,when off cable reception
 TV Reception or Cable Selector Switch: Press this button to chose from TV or cable reception
Installation
 Step 1: Choosing a Location: Make sure the mounting location has a sufficient flat area so the antennaÂs mounting stand can be mounted flat.
 Step 2: Drilling holes: Use the mounting bracket as a template to determine where to drill the holes.
 Step 3: Assembling the Antenna: Rotate the antennaÂs locking nut all the way down on the base. Gently pull the antennaÂs cables thru the mounting stand. Screw the antenna onto the mounting stand then rotate up the locking nut to lock the antenna into place.
 Step 4: Attaching the Antenna: Feed the cables thru the hole on the roof. Put the mounting bolts thru the holes in the mounting stand. On the interior, place the mounting bracket then use the nuts to secure the antenna.
 Step 5: Wiring: Connect the cables from the antenna to distribution wall plate and to the radio. Connect the power cables from the distribution wall plate.
