Xantech HL95BK 80 Ft Extended Range Plasma-Proof Shelf Top IR Hidden Link Receiver Kit
Xantech HL95BK 80 Ft Extended Range Plasma-Proof Shelf Top IR Hidden Link Receiver Kit
The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver. a 789-44 Connecting Block, a Power supply, and 4 283D emitters. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the ÂIR RCVR jack on the 789-44. It can also be plugged into the ÂAUX or ÂIR RCVR jack of other Xantech connecting blocks, such as the models CB12, CB60, and 791-44. The Hidden Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable  as when installing the Hidden Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.
Included:
 1 x HL95 IR Receiver
 1 x Connecting Block
 1 x 12VDC Regulated Power Supply
 4 x Blink-IR Designer Emitters
 1 x Instruction Manual
Specifications:
 Infrared carrier frequency bandwidth: 25  60 kHz.
 Reception range: Up to 80 feet, depending on remote control output
strength and ambient conditions.
 Nominal reception angle: 55 degrees off axis.
 Cable requirements: See ÂINSTALLATION below.
 Max. transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 2.00Âx3.15Âx0.70 (51mm x 80mm x 18mm)
 Power requirements: +12VDC, 20mA.
Compatibility:
 LED LCD
 Plasma TV
 CFL Lighting
 Cable Boxes
 Satellite Boxes
 Remote Controls
Included:
 1 x HL95 IR Receiver
 1 x Connecting Block
 1 x 12VDC Regulated Power Supply
 4 x Blink-IR Designer Emitters
 1 x Instruction Manual
Specifications:
 Infrared carrier frequency bandwidth: 25  60 kHz.
 Reception range: Up to 80 feet, depending on remote control output
strength and ambient conditions.
 Nominal reception angle: 55 degrees off axis.
 Cable requirements: See ÂINSTALLATION below.
 Max. transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 2.00Âx3.15Âx0.70 (51mm x 80mm x 18mm)
 Power requirements: +12VDC, 20mA.
Compatibility:
 LED LCD
 Plasma TV
 CFL Lighting
 Cable Boxes
 Satellite Boxes
 Remote Controls