Xantech ML85K LCD/CFL Universal Micro Link 80 Feet Standrad Range IR Receiver Kit

The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable – as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

Specifications:
• Infrared modulation frequency bandwidth: 30 – 60 kHz.
• IR reception range: Up to 80 feet, depending on remote control output
strength and ambient conditions.
• Reception angle: 55 degrees off axis for 50% range reduction.
• Cable requirements: 3-conductor. Use 24 gauge up to 200’, 22 gauge up
to 600’ 20 gauge up to 2000’, 18 gauge up to 5000’ – unshielded OK.
• Max. transmission length: 1 mile using 18 gauge wire.
• Maximum current output: 100mA
• Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
• Dimensions: 1/2” diameter x 2” deep (13mm x 50mm).
• Power requirements: +12VDC, 20mA.

Kit includes:
• 1x ML85 IR receiver
• 1x Model 789-44 connecting block
- Connects one IR receiver to 4 IR emitter ports
- Enough power to drive up to 4 dual emitters
• 1x 12VDC regulated power supply
• 4x Blink-IR™ Designer emitters
• 1x Instruction manual
• 1x Trim kit with white, black, and brass bezels