Xantech ML95 Micro Link 120 Feet Extended range Universal/Plasma IR Receiver
Xantech ML95 Micro Link 120 Feet Extended range Universal/Plasma IR Receiver
The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the ÂIR RCVR jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable  as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.
Specifications:
 Infrared modulation frequency bandwidth: 25  60 kHz.
 IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions.
 Reception angle: 55 degrees off axis for 50% range reduction.
 Cable requirements: 3-conductor. Use 24 gauge up to 200Â, 22 gauge up to 600 20 gauge up to 2000Â, 18 gauge up to 5000  unshielded OK.
 Max. transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 0.7 diameter x 2.2 deep (18mm x 56mm).
 Power requirements: +12VDC, 20mA.
Mounting
Drill a 1/2Â hole in any surface, such as a cabinet panel. Pass the lead and the body of the ML95 through the hole and secure from the rear with the nut (supplied).
Included:
 Universal Micro Link IR Receiver Extended Range
 Owner's manual
 Black, brass and white bezels
Specifications:
 Infrared modulation frequency bandwidth: 25  60 kHz.
 IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions.
 Reception angle: 55 degrees off axis for 50% range reduction.
 Cable requirements: 3-conductor. Use 24 gauge up to 200Â, 22 gauge up to 600 20 gauge up to 2000Â, 18 gauge up to 5000  unshielded OK.
 Max. transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 0.7 diameter x 2.2 deep (18mm x 56mm).
 Power requirements: +12VDC, 20mA.
Mounting
Drill a 1/2Â hole in any surface, such as a cabinet panel. Pass the lead and the body of the ML95 through the hole and secure from the rear with the nut (supplied).
Included:
 Universal Micro Link IR Receiver Extended Range
 Owner's manual
 Black, brass and white bezels