Xantech
Xantech DL95 Extended Range Universal Dinky Link Upto 120 feet Reception IR Receiver
Xantech DL95 Extended Range Universal Dinky Link Upto 120 feet Reception IR Receiver
Couldn't load pickup availability
These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. Â anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 120 feet away.
Specifications:
 Reception angle: +/- 60 degrees.
 Cable requirements: See ÂINSTALLATION below.
 Max. Transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA.
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 2.55 x 0.55 x 0.35 (65mm x 14mm x 9mm).
 Power requirements: +12VDC, 10mA.
Mounting:
The IR receiver can be mounted to any flat surface, using the two-sided adhesive tape supplied. Two screws are included for mounting the 3-terminal block provided with the IR receiver.
An additional feature is a wire channel on the rear of the surface mount IR receiver. This will give the installer the ability to provide clean wire dressing in any direction.
Warranty
Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at XantechÂs option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.
Specifications:
 Reception angle: +/- 60 degrees.
 Cable requirements: See ÂINSTALLATION below.
 Max. Transmission length: 1 mile using 18 gauge wire.
 Maximum current output: 100mA.
 Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
 Dimensions: 2.55 x 0.55 x 0.35 (65mm x 14mm x 9mm).
 Power requirements: +12VDC, 10mA.
Mounting:
The IR receiver can be mounted to any flat surface, using the two-sided adhesive tape supplied. Two screws are included for mounting the 3-terminal block provided with the IR receiver.
An additional feature is a wire channel on the rear of the surface mount IR receiver. This will give the installer the ability to provide clean wire dressing in any direction.
Warranty
Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at XantechÂs option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.
